Mipeg X Compact - The Safe Load Indicator System

The unit is based upon the MIPEG X system concept, offering a smaller, less complex system with reduced features using a 7” color touch screen display.

Monitor and display the crane operation showing:

• Hook Load, the load suspended by the crane hook
• The crane operating Radius
• The operator selected Sea Duty and crane rigging, #Falls

Based upon the selections, the crane OEM Safe Working Load ( SWL) will be displayed. The display units may either be the imperial Lbs & Feet or the Metric, Tonne and Meters.
The large, clear analogue pointer will show the % of Safe Working Load ontop of the “traffic light” Green - Yellow - Red color band.

Configurable features and settings:

• Safe reach

• Boom Angle, inclination above horizontal

• Crane Overturning / Tipping Moment

 

Easy to understand using intuitive graphics and symbols.

  • Touch screen for simple, quick operation and acknowledgement
  • High back lighting of 1000 cd/m2 – giving a visible display even in sunlight, dimmable for night operation.
  • Resistive touch screen. May be used with gloves.
  • On board help such as: guidance and help procedures

 

Extreme specification

  • All parts including the operator`s display, ingress IP 66
  • System operating temperature
  • Cab equipment: -20 to 158oF (-30 to 70ºC)
  • External, boom mounted equipment -40 to 158ºF (-40 to 70ºC)
  • Certification to meet both Atex and IECEx (zone 2)

 

Compatibility

The Mipeg X Compact use the same sensors, interface and logic and computer as the Mipeg X, allowing seamless possible upgrade to all Mipeg X features already using the same sensors

Need Pricing?  Fill out our Request a Quote form to speed along your request. 

Have a question?  Ask a question to send your inquiry directly to our support team.

Contact us directly or find your nearest authorized representative.



Worldwide Representatives for Mipeg

Related Products

Operator's Display

The Mipeg X system uses a graphical color, touch screen display. The unit is programmed and operates as a highly flexible and expandable unit.

Automatic Overload Protection System - AOPS

Our AOPS system solution is built to comply with the EN 13852-1. Any AOPS has to be designed in close cooperation with the Crane OEM or other person with similar knowledge to make sure that the combined solution meet the requirement.

Boom Angle Sensor

The boom angle is measured and calculated/converted to show the operating radius to the crane driver.

Mipeg Data Delivery

The Mipeg X is a crane monitoring system which is monitoring and logging the crane load cycles. The system is an event recorder which mean that no recording is done when the crane is idle.

Hook Position Indicator

The Mipeg X system monitors the hook position. The display will give a clear visual indication of the hook with different reference points.

Roll and Pitch - Vessel Movement

If there are limitations in the safe lifting due to vessel roll and pitch, the Mipeg X is now ready to monitor and alarm if the vessel moves outside the crane rated roll and pitch limits.